Cellulose flakes FiberTherm Floc
Loose cellulose flakes for thermal and acoustic insulation.
FiberTherm Floc is composed of loose cellulose flakes that fill all the cavities and can be used for the insulation of roofs, walls, floors and floors. The cellulose flakes are blown at high pressure in the hollow spaces and occupy the entire available volume taking the shape of the surrounding elements.
Related articles
FiberTherm Floc contains cellulose flakes that fill the cavities. Each of these flakes contains some advantages: stability and excellent thermal insulation properties.
To produce the insulating layer, the material is injected at high pressure into the closed spaces and adapts exactly to the limiting elements. Therefore FiberTherm Floc is suitable both as an insulating material for industrial prefabrication (for example complete wall elements) as well as for renovation works.
With FiberTherm Floc it is not necessary that the compartments to be insulated have the standard dimensions of the insulating materials on the market. Even the plant elements present in the cavities are completely enveloped by the insulating material without manual intervention. Thanks to a proven technique, with the blowing we obtain a homogeneous filling without interruption even in the most complex constructions.
FiberTherm Floc can also be used for free-blowing insufflation. The open blowing procedure is used to lay FiberTherm Floc as an insulating material on horizontal, vaulted or slightly inclined surfaces between the truss beams. For existing or new buildings, wooden buildings or wooden load-bearing structures or other types of lightweight construction - with FiberTherm Floc insulation becomes particularly convenient and environmentally friendly.
The laying of FiberTherm Floc is carried out only by partners with appropriate training and authorized companies (according to the general approval of the building inspectorate). In-company training courses and monitoring by the Institute for Material Testing in North Rhine-Westphalia (MPA NRW) guarantee designers and clients the maintenance of a high level of quality - in production and installation. FiberTherm Floc is compressed, packed in bags, delivered. The compacted flakes are prepared in special blowing machines and through flexible pipes conveyed up to the laying point. The advantage: the machine and the insulating material can remain outside the building, allowing you to work quickly even in tight spaces.
With FiberTherm Floc no waste is generated. The dust or dirt generated is compostable. If installed correctly it can be reused even after many years.
The material is also recyclable, with relative NaturePlus certification.
FiberTherm Floc loose cellulose flakes have the following characteristics:
• seamless insulating layer;
• excellent thermal insulation and thermal capacity;
• high quality thanks to the installation performed by qualified companies;
• processing without waste;
• excellent sound insulation;
• excellent insulating properties, in summer as in winter;
• breathable, promotes a comfortable and healthy environment;
• recyclable, ecological, respects the environment;
• tested and authorized building material based on current European standards.
FiberTherm Floc loose cellulose flakes are suitable for any type of thermal and acoustic insulation that requires the filling of cavities between structural elements, such as:
• wall cavities;
• prefabricated elements for walls and floors to be filled with insulating material;
• floors, as part of building rehabilitation interventions.
| Delivery | Packs/Pallet | Weight/Pallet(kg) | Pallet dimensions |
|---|---|---|---|
| PE bags 13 kg | 21 | 273 | approx. 0,80 x 1,20 x 2,60 m (Lenght x Width x Height) |
General indications:
• keep the bags in a dry place;
• remove the pallet film when it is on a flat, stable and dry surface.